Safety / Protection

Super efficient, reusable products that work!

Uncompromising safety!

All protective solutions offered by LOGIPOST are high-quality products that fulfil their basic and most important function – ensuring work safety in industrial facilities. The comprehensive range, high quality of protective products and ease of installation make them the most frequently chosen method for securing warehouse structures and protecting production and distribution areas. The innovative technology used in the anti-collision solutions ensures long-term protection of the protected structure, even after multiple collisions with vehicles inside the warehouse. Reinstalling the system after a collision is very simple and takes a minimal amount of time to fully secure the structure.

COLLISION PROTECTION PRODUCTS

EAS Corner Collision Protection
The modular FAS frontal impact protection system and EAS corner impact protection system provide maximum protection for warehouse racks and other structures.

The innovative, unique Smart Impact Control (S.I.C.) system protects all critical components potentially exposed to damage as a result of a sudden collision between warehouse vehicles and the protected structure. The S.I.C. system allows for full control of the effects of an impact.

The photo shows the EAS-1020 corner impact guard, including the RSP-1002 impact panel and the RAS102 shelf impact guard.

COLLISION PROTECTION PRODUCTS

FAS Front Collision Protection
The protection consists of two integral parts: the cover and the base, connected by a special HV connector.

 

Thanks to this design, if the pressure force is exceeded (a strong impact), the vertically mounted protective shield detaches from the base, thus protecting not only the rack but also the floor and anchors!

 

After quickly reinstalling the bumper, the system once again provides 100% protection for the warehouse structure. No costs for resurfacing the floor and no downtime resulting from the need to restore full structural protection.

 

The photo shows the FAS-210 front impact guard.

COLLISION PROTECTION PRODUCTS

RSP Anti-Collision Protective Panel
The RSP plus panel protection system provides maximum protection for warehouse racks and other structures. The RSP anti-collision system consists of a specially profiled arm made of 5mm thick steel, two EAS corner bumpers, and mounting and adjustment screws. The RSP plus panel arm is adjustable on both sides.

The photo shows the RSP-1002 front + EAS corner impact bumper.

COLLISION PROTECTION PRODUCTS

RSP Anti-Collision Protective Panel
The height of the RSP module is 310 mm. Together with the EAS corner bumpers (part of the RSP plus kit), it creates an effective anti-collision barrier with a height of 400mm.

The RSP plus modular protection system is designed to work with point protection to create a total protective surface with an appropriately adjustable protection width.

 

The photo shows the RSP – 1002 front impact panel including 2 x EAS corner collision protectors.

COLLISION PROTECTION PRODUCTS

Rack Collision Protection
Innovative manufacturing technology makes RAS protectors suitable for use in almost every distribution and warehouse environment.

They effectively protect rack structures against the risk of unwanted damage resulting from collisions with vehicles inside the warehouse.

The bumper is designed to absorb impact forces throughout its entire structure. It creates a crumple zone, protecting the rack column from both frontal and side impacts.

 

The photo shows the RAS-102 rack collision protection.

COLLISION PROTECTION PRODUCTS

Rack Collision Protection
Upon impact, the elements deform and then return to their original position, ensuring full protection of the rack structure. RAS protectors are made of high-density polyethylene (HDPE), making them extremely durable and providing long-lasting protection. They are also ideal for use in cold stores where the ambient temperature reaches -40°C!

The protector elements are exceptionally quick and easy to install.

The photo shows the RAS-102 rack collision protection

COLLISION PROTECTION PRODUCTS

SSS Structure Pillar Protection
The SSS column and pillar protection system is a new solution that allows the protection of all types of columns and pillars with irregular cross-sections.

SSS is a quick and easy way to install an effective protective shield yourself, without the use of tools.

The modular SSS design guarantees uniform absorption of impacts from all directions.

 

The photo shows the SSS-1010 Column and Pillar Protection

COLLISION PROTECTION PRODUCTS

SSS Structure Pillar Protection
An additional advantage of the SSS modular protection system is the ability to adapt the network of modules to almost any shape of column or pillar found in modern buildings (rectangular, H-shaped, I-shaped, oval, spherical, elliptical).

They are also suitable for wall mounting – the rods are additionally attached to the wall.

Suitable for use in cold stores (up to -40°C). Resistant to UV radiation and various weather conditions (for indoor and outdoor use).

The photo shows the SSS-1010 structure pillar protection

COLLISION PROTECTION PRODUCTS

SAS FLEX Column Collision Protection
Thanks to its carefully selected low-density polyethylene (LDPE) composite and innovative modular design, the SAS protector can be used in almost any manufacturing and warehouse environment as primary protection for columns, pillars or support structures in manufacturing, warehouse and other buildings.

SAS protector models are suitable for columns and pillars with a round and rectangular cross-section.

The photo shows the SAS FLEX -4030 column collision protection

COLLISION PROTECTION PRODUCTS

SAS FLEX Column Collision Protection
They are very easy to install – no tools required.

Durable, hard and safe – resistant to stress and deformation.

Pneumatically cushioned – optimally absorbs strong impacts.

Resistant to changing weather conditions – also suitable for outdoor use!

Resistant to changes in ambient temperature – also suitable for use in cold stores.

Resistant to UV radiation – they retain their bright yellow, visible colour for a long time.

The photo shows the SAS FLEX 5040 column collision protection.

COLLISION PROTECTION PRODUCTS

SAS Column Collision Protection
How does it works?

The SAS protector is 15 cm thick. An air column is formed between the composite layer adjacent to the protected pillar and the outer wall of the protector.

During a collision (impact on the protector), the kinetic energy generated during the impact is dissipated by elastic deformation of the outer wall of the protector, and at the same time a mass of air is ejected (cushioned) through a specially designed opening in the base of the protector.

The lack of force (pressure) exerted on the walls after a collision causes the protector to slowly deform back to its original shape, “sucking” ambient air back into the protector.

 

The photo shows the SAS -2500 column collision protection

COLLISION PROTECTION PRODUCTS

SAS Column Collision Protection
Thanks to the material used in the construction of the SAS (flexible deformation) protector, any employee who finds themselves in a dangerous situation within the SAS or SAS FLEX protector (e.g. limbs or torso get stuck between a warehouse vehicle and the protector) has a chance of surviving the incident without any invasive consequences. In the case of any other steel safety structure, the chances of a worker surviving an incident without any consequences are drastically reduced, practically to zero.

The photo shows the SAS – 2500 column collision protection.

Innovation compliant with regulations

All products available at LOGIPOST comply with international occupational safety standards and fully meet all the key requirements of Occupational Health and Safety regulations in UE. They are ideal for use both inside and outside industrial facilities and are highly visible in virtually all operating conditions.